Boca-research Turbo Series Uživatelský manuál stáhnout pdf (Strana 16)

IO Turbo Series

2. Insert the board in the slot you

have selected so the edge

connector on the bottom rear of

the board mates with the socket

on the motherboard. Press down

firmly on the board. Use the

removed screw to secure the

board.

3. Replace any other adapter boards you may have removed

and re-attach any detached internal cables. If you have the

Turbo 2x2 version, continue with step 4. Otherwise, skip to

step 5.

4. Attach cable/bracket assembly to Serial B and Parallel B

connectors on the IO board, making sure that the red stripe

plugs into pin number “1” on the board connector. After

removing screw and, for the Turbo 2x2, adjacent rear slot

cover, secure the bracket using the screw you just removed.

5. Replace the system cover taking care not to let it catch on

the disk drive or power cables. Once the cover is in place,

replace all the screws that you removed earlier. Reconnect

any previously removed external cables.

9361.p65 2/11/99, 11:02 AM16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Žádné komentáře

Boca-research Turbo Series Uživatelský manuál Strana 16